CRUCIAL SOLID STATE DRIVE FOR MACBOOK PRO MID 2009 INSTALL
CRUCIAL SOLID STATE DRIVE FOR MACBOOK PRO MID 2009 DRIVER
CRUCIAL SOLID STATE DRIVE FOR MACBOOK PRO MID 2009 MANUAL
CRUCIAL SOLID STATE DRIVE FOR MACBOOK PRO MID 2009 SOFTWARE
CRUCIAL SOLID STATE DRIVE FOR MACBOOK PRO MID 2009 MAC

CRUCIAL SOLID STATE DRIVE FOR MACBOOK PRO MID 2009 MAC

There are many versions of the Mac operating system (called macOS), and you need to determine which version you’re using. When handling your SSD, try not to touch its gold connector pins with your fingers.

Using a SATA-to-USB cable, attach one side to the SSD and the other end to your computer.

CRUCIAL SOLID STATE DRIVE FOR MACBOOK PRO MID 2009 INSTALL

Set it aside for now – it won’t come into play until later in the process, and based on your type of Mac system, you may not even need it.īefore starting the install process, save any important files on your computer to a USB flash drive or external storage drive. In the box with your SSD is a spacer (it looks like a black bracket). an iMac ® from almost any year you’ll need a 2.5 inch to 3.5 inch convertor because these systems have larger storage bays than other Mac computers.a Mac Pro ® system manufactured between 20 or.Additionally, if you’ll be installing into:

CRUCIAL SOLID STATE DRIVE FOR MACBOOK PRO MID 2009 MANUAL

I have heard of a problem on this forum where someone was having issues booting into the old HD which was installed in optical bay.Īlso if your are planning to upgrade to El Capitan 10.11.3 it would be best to upgrade to at least 8 GB of RAM.You’ll need your Crucial SSD, a screwdriver, your Mac system’s owner’s manual (which will specify the type of screwdriver you need), and a SATA-to-USB cable (sold separately). Once you are sure it works, you can then swap it out.Īlso once you put your old hard drive in the optical bay you will want to format it. The advantage of cloning your hard drive is that you will be able to boot from the SSD without removing your Hard Drive for testing. You would connect the SSD to either an external drive case =6430&Ntt=On-The-Go+Kit or a USB to SATA cable. The best way to upgrade to an SSD is to Clone your existing hard drive to the SSD using either Carbon Copy Cloner or Super Duper.

OWC also sells the data doubler which will also work. When I replaced my HD with an SSD I used the following to install the old HD is the optical drive bay. However, replacing the HD with an SSD will increase the performance of your existing computer by quite a bit. I guess another way to look at it is, if you were to invest in a newer faster Mac, it would cost quite a bit $$$ That would save you from buying the data doubler. What you could do is buy the external case, clone your drive to SSD and then install the old HD in the external case instead of the optical bay. I would personally not do that, but you could try it. You could probably install the SSD in the optical bay to do the cloning, but you would need the data doubler. Do you recommend that, or do you think that would cause issues? make sure it boots okay from the SSD, and then switch the SSD to the 7' drive bay and the old HDD over to the optical bay. I wonder if I could install the new SSD into the optical bay and then do the cloning. I am using the AGPtek and have not noticed any speed issues with it.įirewire is faster than USB 2, but I don't know of any way to upgrade your computer to USB 3.

CRUCIAL SOLID STATE DRIVE FOR MACBOOK PRO MID 2009 SOFTWARE

As far as I know they are just connectors, there is no software or firmware involved. Yes either AGPtek or OWC data doubler would work. Seagate Momentus XT 500 SataII 32 Mb Cache, 7200 rpm Hybrid SSD with jumper cable Seagate XT500 hybrid - link speed 3 gb/s

+OWC Mercury Extreme Pro - link speed 3 gb/s ? Mac SM0412G PCIe 500 GB speed rank 10th/734 So far I have checked out a few, and I am not sure if all of these listed will be compatible with my mac: What are my options, and what would be compatible with my macbook pro? I wanted to also stick the original HDD into the optical drive and use it for backup and media data.

CRUCIAL SOLID STATE DRIVE FOR MACBOOK PRO MID 2009 DRIVER

so I was looking for an SSD that would be 3 GB/s (with an updated firmware driver to make sure it is so). I've ran into a lot of information that involves the link speeds of 3 gb/s being negotiated to 1.5 gb/s (mine is currently the original HDD and the link speed is being negotiated to 1.5 gb/s). What are my options for upgrading to an SSD for my Mid-2009 Macbook Pro?

Crucial solid state drive for macbook pro mid 2009